Lunchable Jar

Lunchable Jars

You Will Need:

• 2 same mouthed mason jars. Wide mouth 8 oz jars are perfect because 8 oz is a serving size of most things. However, once you’ve made the connector rings, you can swap out ANY jar of the same mouth size, 8 oz tall one or a short 4oz; whatever!
• Lead Free Solder.
• Soldering iron.
• Sand Paper
  
  1. Take off the rings to your jars. Sand them on top to remove any coatings that might prevent the solder sticking.
  
  2. Using your soldering iron place “blobs” of solder at even intervals near the interior hole of the rings. Solder is pretty easy to work with, just stick it on the iron until it melts!
  3. Place the two rings together. Use your soldering iron to heat up those blobs while holding the rings steady. They will melt then re-solidify  forming a dishwasher safe, permanent bond!
  
  4. Once the interior hole has been secured, melt blobs of solder at even intervals on the outside.
  
  5. That’s it!! Start hooking up amazing lunch combinations!